Treatment system for solid matrix contaminated with fluoranthene. I--Modified extraction technique.

A laboratory-scale ultrasonication technique was developed for fluoranthene extraction from soils and sediments where the utilized organic solvent would be recovered after the extraction process. Therefore, the remedied soils and sediments would be free from toxicant and trace of added chemicals. The developed ultrasonication technique outlined here is an integrated part of a complete remediation system consisting of extraction and solar detoxification reactors. This paper investigates extraction efficiencies under different conditions, outlines solvent recovery technique and compares extraction efficiency of the developed ultrasonication technique with a commercially available laboratory-scale sonication bath. The spiked soil sample with fluoranthene (19.4 microg g(-1)) and organic solvent was ultrasonicated at 40 degrees C for 20 min. The sonicated mixture was allowed to settle for 10 min before the extract gravitated into the modified solar reactor for fluoranthene detoxification. The added solvents were removed from the remedied soil before it was released to site. The mixture of cyclohexane and ethanol (CH:ETOH) (3:1) was the favorable solvent from among 10 organic solvents because of its high extraction efficiency, safety and low cost. Preliminary results indicated that the developed extraction technique recovered more than 93% of fluoranthene from soil samples.     

Moisture absorbers for food packaging applications

Environmental Chemistry Letters - Even though moisture in food products is useful for the quality of foods, excess moisture in a package is unfavorable to the quality of the food product and the...     

Characterization of dry fractions contained in municipal solid waste in developing countries: a case study of a region in Morocco

Journal of Material Cycles and Waste Management - Despite its impact on the environment, the most widely used method for waste management in African countries is landfilling. Energy recovery, in...     

Performance analysis of photovoltaic-thermal air collectors combined with a water to air heat exchanger for renewed air conditioning in building

Environmental Science and Pollution Research - In this work, a new solar system that includes photovoltaic-thermal (PVT) air collectors coupled to a water-to-air heat exchanger is investigated. The...     

Climate change in Algeria and its impact on durum wheat

According to IPCC reports, the Mediterranean basin and particularly the North African area are amongst the most vulnerable regions to climate change. However, the information concerning the North African zone is very limited, and studies on climate change have never been conducted in Algeria up to now. This paper aims at bridging this information gap and initiates a first research on the impact of climate change on durum wheat cropping, the most strategic commodity in the food system and in the national economy of Algeria. Climate projections for the distant future (2071–2100), obtained from the ARPEGE-Climate model of Météo-France run under the medium A1B SRES scenario, are introduced into a simple agrometeorological crop model previously validated with field data. Two options for the sowing date are assessed: a dynamical date, chosen within the traditional sowing window by means of a rainfall criterion, or a prescribed date with supplemental irrigation on the same day. Crop development is modelled using thermal time, and maximum yield is determined from the accumulation of solar radiation. A water stress index is inferred from a daily water balance model, and actual yield is estimated from potential yield corrected by the water stress index. The model also takes into account the occurrence of dry periods during the growing season, which can induce partial or total failure of the crop cycle. Two stations, representative of two of the three agroclimatic areas where durum wheat is grown, were chosen: Algiers in the central northern region and Bordj Bou Arreridj in the eastern high plains. Climate change is not similar for both areas, but a tendency towards aridity is clear especially in spring. Future temperature and potential evapotranspiration increase in both regions with a maximum in spring and summer. In Algiers, rainfall will decrease throughout the year and mainly in spring and summer. Conversely, summer precipitation in Bordj Bou Arreridj will increase significantly. In both regions, the autumn rains will increase in the future climate, the possibilities of early sowing will be improved, crop cycle will be reduced, and harvest will take place earlier. In Algiers, yields tend to decrease in the future climate, whereas in Bordj Bou Arreridj, a dynamical (earlier) sowing will tend to keep yields at their current level.     

Biodegradation Properties of Poly-ε-caprolactone,Starch and Cellulose Acetate Butyrate Composites

Blending starches with polymers such as poly-ε-caprolactone (PCL) has been used as a route to biodegradable plastics. The addition of starch has a significant effect on all physical properties including toughness, elongation at break. On blending cellulose acetate butyrate (CAB) with starch and PCL, improvements in most physical and mechanical properties were observed. This is may be due to CAB acts as a compatibilizer between PCL and starch due to the presence of both hydroxyl groups (in starch and CAB) and ester carbonyls (in PCL and CAB). The presence of different compounds affects the way in which other components degrade. For example the structure of CAB within a starch and PCL combination might make the degradation rate different to that when starch was only mixed with PCL. To check whether this was the case, three combinations of different blends were used to calculate the rate of degradation of each of them separately. These degradation rate constants were then used to predict the theoretical degradation which was checked against the experimental value for other different combinations.     

Porous media grain size distribution and hydrodynamic forces effects on transport and deposition of suspended particles

The effects of porous media grain size distribution on the transport and deposition of polydisperse suspended particles under different flow velocities were investigated. Selected Kaolinite particles(2–30 μm) and Fluorescein(dissolved tracer) were injected in the porous media by step input injection technique. Three sands filled columns were used: Fine sand,Coarse sand, and a third sand(Mixture) obtained by mixing the two last sands in equal weight proportion. The porous media performance on the particle removal was evaluated by analysing particles breakthrough curves, hydro-dispersive parameters determined using the analytical solution of convection–dispersion equation with a first order deposition kinetics, particles deposition profiles, and particle-size distribution of the recovered and the deposited particles. The deposition kinetics and the longitudinal hydrodynamic dispersion coefficients are controlled by the porous media grain size distribution. Mixture sand is more dispersive than Fine and Coarse sands. More the uniformity coefficient of the porous medium is large, higher is the filtration efficiency. At low velocities, porous media capture all sizes of suspended particles injected with larger ones mainly captured at the entrance.A high flow velocity carries the particles deeper into the porous media, producing more gradual changes in the deposition profile. The median diameter of the deposited particles at different depth increases with flow velocity. The large grain size distribution leads to build narrow pores enhancing the deposition of the particles by straining.     

On the ability of consumer electronics microphones for environmental noise monitoring

The massive production of microphones for consumer electronics, and the shift from dedicated processing hardware to PC-based systems, opens the way to build affordable, extensive noise measurement networks. Applications include e.g. noise limit and urban soundscape monitoring, and validation of calculated noise maps. Microphones are the critical components of such a network. Therefore, in a first step, some basic characteristics of 8 microphones, distributed over a wide range of price classes, were measured in a standardized way in an anechoic chamber. In a next step, a thorough evaluation was made of the ability of these microphones to be used for environmental noise monitoring. This was done during a continuous, half-year lasting outdoor experiment, characterized by a wide variety of meteorological conditions. While some microphones failed during the course of this test, it was shown that it is possible to identify cheap microphones that highly correlate to the reference microphone during the full test period. When the deviations are expressed in total A-weighted (road traffic) noise levels, values of less than 1 dBA are obtained, in excess to the deviation amongst reference microphones themselves.     

Treatment system for solid matrix contaminated with fluoranthene. II--Recirculating photodegradation technique.

A laboratory-scale solar reactor and photodegradation technique were developed to enhance the degradation process of fluoranthene. Fluoranthene was used in this study to represent toxic polycyclic aromatic hydrocarbons (PAHs) that are persistent in the environment. The extracted fluoranthene from soil in organic solvent (EFOS) and hydrogen peroxide (H2O2) were pumped from a 100 ml vessel into a solar glass cell coated with titanium dioxide (TiO2) at 80 microl min(-1). This work compares the efficiency of the developed photocatalytic degradation technique with the conventional batch process. The degradation efficiency of the developed technique was assessed at different initial concentrations of fluoranthene and percentages of H2O2 in the extract using different flow rates. Preliminary results indicated that the developed technique degraded 99% of fluoranthene from EFOS in the presence of H2O2 and 83% without H2O2. There was no significant difference between fluoranthene degradation rates by the developed technique and the batch method. The developed technique however, treated double the volume of solution that was treated by the batch reactor method which was time consuming and required continuous attention.     

Rain-out investigation: Initial droplet size measurement

Droplet size distribution inside water flashing jets and corresponding rain-out fraction were measured. Mass distribution showed that a few droplets are ‘large’ (d>150 μm) and count for more than 85% of the liquid mass in the jet because of their large individual mass. This could be due to incomplete thermal fragmentation. It could explain the rain-out falling near the orifice or pipe exit.